ESKİ DOĞU BLOKU ÜLKELERİNİN DEMİR ÇELİK
ÜRÜNLERİNİN DÜNYA NORMU
KARŞILAŞTIRMALARI |
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
steel
grade |
dimensions within the limits,
mm |
notes
|
Hot-rolled sheets of carbon
quality and ordinary quality steels DSTU 2834-94 (GOST 16523-97)
| ||
08кп, пс;
10кп, пс |
2.0-2.5x1000 - 1260x1800-4000
|
|
15кп, пс;
20кп, пс |
2.6-3.0x1000 - 1400x1800-5000
|
|
10; 15;
20; 25 |
3.1-3.9x1000 - 1500x1800-6000
|
|
Ст. 1кп,
пс, сп; Ст. 2кп, пс,сп; Ст. 3кп, пс, сп; 45, 55 |
3.0-3.9x1000 - 1300x2000-3500
|
|
Hot-rolled sheets of coils of
carbon quality and ordinary quality steels DSTU 2834-94 (GOST 16523-97) TU
U 14-4-426-98 | ||
08кп, пс;
10кп, пс; 15кп, пс; 20кп, пс; 10; 15; 20; 25; Ст. 1кп, пс, сп; Ст. 2кп,
пс, сп; Ст. 3кп, пс, сп; 08Ю |
Coil
weight of up to 8.0 t: 2.0-2.5x1000-1250; 2.6-3.0x1000-1400;
3.1-3.9x1000-1500 |
Weight of
coil not less than 4.0 kg per 1 mm of strip width inside dia of 750 mm
outside dia up to 1250 mm |
08кп, пс;
10кп, пс; 15кп, пс; 20кп, пс; 10; 15; 20; 25; Ст. 1кп, пс, сп; Ст. 2кп,
пс, сп; Ст. 3кп, пс, сп; 08Ю |
Coil
weight of up to 16.0 t: 2.5x1000; 2.6-2.9x1000-1250; 3.0-3.9x1000-1400
|
Weight of
coil not less than 8.0 kg per 1 mm of strip width inside dia of 750 mm
outside dia up to 1600 mm |
In
conformity to requirements of DSTU 2834-94 (GOST 16523-97) rolled sheets
are produced:
·
1. ordinary quality carbon steel,
durability groups: ОК 300В, ОК 360В, ОК 370В;
·
2. quality carbon steel,
durability groups: К 260, К 270, К 310, К 330, К 350, К 390, К 490.
|
Main
technical characteristics of hot-rolled sheets DSTU 2834-94 (GOST
16523-97) | ||||
durability group
|
tensile
strength Н/mm²(kg/mm²) |
elongation ð4, %, not less
than |
bending
to parallelism of sides |
other
requirements |
К 260В
|
260-380
(27-39) |
28
|
d=a
|
Rolled
products are produced of categories 1, 4 and 5; surface finish group III -
IV |
К 270
|
207-410
(28-42) |
26
|
d=a
|
Rolled
products are produced of categories 1, 4 and 5; surface finish group III -
IV |
ОК 300В
|
300-480
(31-49) |
23
|
d=a
|
Rolled
products are produced of categories 1, 4 and 5; surface finish group III -
IV |
К 310В
|
310-440
(32-45) |
25
|
d=a
|
Rolled
products are produced of categories 1, 4 and 5; surface finish group III -
IV |
К 330В
|
330-460
(34-47) |
24
|
d=a
|
Rolled
products are produced of categories 1, 4 and 5; surface finish group III -
IV |
К 350В
|
350-500
(36-51) |
23
|
d=a
|
Rolled
products are produced of categories 1, 4 and 5; surface finish group III -
IV |
ОК 360
|
360-530
(37-54) |
22
|
d=2a
|
|
ОК 370
|
370-530
(38-54) |
22
|
d=2a
|
|
К 390
|
390-590
(40-60) |
20
|
d=2a
|
|
К 490
|
490-720
(50-73) |
13
|
|
|
|
|
|
|
|
steel
grade |
dimensions within the limits,
mm |
notes
|
Hot-rolled strip of quality and
ordinary quality carbon steel in coils TU 14-15-305-93
| ||
Ст. 1, 2,
3кп, пс, сп; 08кп, пс; 10кп, пс; 15кп, пс; 20кп, пс; 10; 15; 20; 25
|
Thickness: 2.0-2.2, =>2.2-2.8,
=>2.8-3.2, =>3.2-3.9; |
Weight of
coil not less than 4.0 kg per 1 mm of strip width. Coil inside dia of 750
and 550 mm |
On
agreement between the producer and the user the steel strips can be
pickled and oiled as specified in the order.
| ||
Small-size rolled product TU U
14-4-404-97 | ||
Ordinary
quality steel and quality structural carbon steel, low-alloy steel
|
Sheet
sizes to specifications |
|
Hot-rolled sheets of low-alloy
structural steel GOST 17066-80 | ||
09Г2,
14Г2, 09Г2С, 12ГС, 16ГС |
2.5-
2.9x1000 - 1250x1800-4000; 3.0-3.9x1000-1350x1800-5000 |
|
|
|
|
Main
technical characteristics of hot-rolled low-alloy structural steel sheets.
(GOST 17066-80) | |||
steel
grade |
tensile
strength H/mm² (kg/mm²) |
yield
point H/mm² (kg/mm²) |
elongation ð4, %
|
not less
than | |||
09Г2
|
441 (45)
|
295 (30)
|
20
|
14Г2
|
461 (47)
|
-
|
17
|
09Г2С
|
490 (50)
|
345 (35)
|
20
|
12ГС
|
461 (47)
|
315 (32)
|
22
|
16ГС
|
490 (50)
|
325 (33)
|
20
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
steel
grade |
fraction
of total mass of element, % | ||||||||
C
|
Mn
|
Si
|
S
|
P
|
Ni
|
Cu
|
Cr
|
Al
| |
not more
than | |||||||||
GOST
380-94(DSTU 2651-94) | |||||||||
Ст.1кп,пс
|
0.06-0.12
|
0.25-0.50
|
0.05
|
0.05
|
0.04
|
0.3
|
0.3
|
0.3
|
|
Ст.2кп,пс
|
0.09-0.15
|
0.25-0.50
|
0.05
|
0.05
|
0.04
|
0.3
|
0.3
|
0.3
|
|
Ст.2сп
|
0.09-0.15
|
0.25-0.50
|
0.15-0.30
|
0.05
|
0.04
|
0.3
|
0.3
|
0.3
|
|
Ст.3кп,
пс |
0.14-0.22
|
0.30-0.60
|
0.05
|
0.05
|
0.04
|
0.3
|
0.3
|
0.3
|
|
Ст.3сп
|
0.14-0.22
|
0.40-0.65
|
0.15-0.30
|
0.05
|
0.04
|
0.3
|
0.3
|
0.3
|
|
Ст.4сп
|
0.18-0.27
|
0.40-0.70
|
0.15-0.30
|
0.05
|
0.04
|
0.3
|
0.3
|
0.3
|
|
Ст.5сп
|
0.28-0.37
|
0.50-0.80
|
0.15-0.30
|
0.05
|
0.04
|
0.3
|
0.3
|
0.3
|
|
GOST
1050-88 | |||||||||
08кп,пс
|
0.05-0.12
|
0.25-0.50
|
0.03
|
0.04
|
0.035
|
0.3
|
0.3
|
0.10
|
|
10кп, пс
|
0.07-0.14
|
0.25-0.50
|
0.07
|
0.04
|
0.035
|
0.3
|
0.3
|
0.15
|
|
10
|
0.07-0.14
|
0.35-0.65
|
0.17-0.37
|
0.04
|
0.035
|
0.3
|
0.3
|
0.15
|
|
15пс
|
0.12-0.19
|
0.35-0.65
|
0.05
|
0.04
|
0.035
|
0.3
|
0.3
|
0.25
|
|
15
|
0.12-0.19
|
0.35-0.65
|
0.17-0.37
|
0.04
|
0.035
|
0.3
|
0.3
|
0.25
|
|
20пс
|
0.17-0.24
|
0.35-0.65
|
0.05
|
0.04
|
0.035
|
0.3
|
0.3
|
0.25
|
|
20
|
0.17-0.24
|
0.35-0.65
|
0.17-0.37
|
0.04
|
0.035
|
0.3
|
0.3
|
0.25
|
|
25
|
0.22-0.30
|
0.50-0.80
|
0.17-0.37
|
0.04
|
0.035
|
0.3
|
0.3
|
0.25
|
|
45
|
0.42-0.50
|
0.50-0.80
|
0.17-0.37
|
0.04
|
0.035
|
0.3
|
0.3
|
0.25
|
|
55
|
0.52-0.60
|
0.50-0.80
|
0.17-0.37
|
0.04
|
0.035
|
0.3
|
0.3
|
0.25
|
|
GOST
9045-93 | |||||||||
08кп
|
н.б.0.10
|
н.б.0.40
|
0.03
|
0.030
|
0.025
|
|
|
|
|
08пc
|
н.б.0.09
|
н.б.0.45
|
0.04
|
0.030
|
0.025
|
|
|
|
|
08Ю
|
н.б.0.07
|
н.б.0.35
|
0.03
|
0.025
|
0.020
|
|
|
|
0.02-0.07
|
NOTE: In
steel grade 08Ю fraction of total mass of aluminium should be within 0.02
to 0.07% and up to 0.07% in steel grade 08ps | |||||||||
GOST
4041-71 | |||||||||
08кп
|
н.б.0.10
|
0.25-0.45
|
0.03
|
0.03
|
0.025
|
0.15
|
0.20
|
0.10
|
|
08пс
|
н.б.0.09
|
0.25-0.45
|
0.04
|
0.03
|
0.025
|
0.15
|
0.20
|
0.10
|
|
08Ю
|
н.б.0.10
|
0.25-0.45
|
0.03
|
0.03
|
0.025
|
0.15
|
0.20
|
0.10
|
|
25пс
|
0.22-0.27
|
0.25-0.50
|
0.03
|
0.04
|
0.040
|
0.25
|
0.30
|
0.25
|
|
GOST
19281-89 | |||||||||
09Г2
|
н.б. 0.12
|
1.40-1.80
|
0.17-0.37
|
0.04
|
0.035
|
0.30
|
0.30
|
0.30
|
|
09Г2Д
|
н.б. 0.12
|
1.40-1.80
|
0.17-0.37
|
0.04
|
0.035
|
0.03
|
0.15-0.30
|
0.30
|
|
09Г2С
|
н.б.
0.12 |
1.30-1.70
|
0.50-0.80
|
0.04
|
0.035
|
0.30
|
0.30
|
0.30
|
|
12ГС
|
0.09-0.15
|
0.80-1.20
|
0.50-0.80
|
0.04
|
0.035
|
0.30
|
0.30
|
0.30
|
|
16ГС
|
0.12-0.18
|
0.90-1.20
|
0.40-0.70
|
0.04
|
0.035
|
0.30
|
0.30
|
0.30
|
|
14Г2
|
0.12-0.18
|
1.20-1.60
|
0.17-0.37
|
0.04
|
0.035
|
0.30
|
0.30
|
0.30
|
|
10XНДП
|
н.б. 0.12
|
1.30-0.60
|
0.17-0.37
|
0.04
|
0.07-0.12
|
0.30-0.60
|
0.30-0.50
|
0.50-0.80
|
|
GOST
14959-89 | |||||||||
65Г
|
0.62-0.70
|
0.90-1.20
|
0.17-0.37
|
0.035
|
0.035
|
0.40
|
0.40
|
0.25
|
|
|
| ||||||||||||||||
|
|||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Rolled
products of Ni stainless steel | |||
GOST
|
steel
grade |
dimensions within the limits,
mm |
notes
|
GOST
7350-77 |
08Х18Н10Т, 08Х18Н10, 12Х18Н10Т,
12Х18Н9, 17Х18Н9 |
Sheets:
4.0-6.0х1000-1250х2000-3500 |
Hold-rolled |
GOST
5582-75 |
|
Sheets:
3.5-3.9х1000-1100х2000-3500 |
Hold-rolled |
GOST
5582-75 |
|
Sheets:
3.0-3.4х1000х2000-3500 |
Hold-rolled |
GOST
5582-75 |
|
Sheets:
2.1-3.9х1000-2000х2000-3000 |
Cold-rolled |
GOST
5582-75 |
|
Sheets:
1.5-2.0х1000-1250х2000-3500 |
Cold-rolled |
GOST
5582-75 |
|
Sheets:
0.7-2.0х900-1100х1400-3000 |
Cold-rolled |
TU U
14-4-438-98 |
08Х18Н10Т, 12Х18Н10Т |
Coils:
3.0-3.9х1000 |
Hold-rolled |
TU U
14-4-438-98 |
08Х18Н10Т
|
Coils:
0.8-2.5х1000 |
Cold-rolled |
| |||
Rolled
products of Ni - free stainless steel | |||
TU
14-226-132-92 |
10Х14АГ15(ДИ-13) |
Sheets:
3.0-6.0х1000х2000-5000 |
Hold-rolled |
GOST
5582-75 |
10Х14АГ15(ДИ-13) |
Sheets:
0.8-2.0х900-1100x2000-3000 |
Cold-rolled |
TU U
14-4-435-98 |
10Х13Г18ДУ(ДИ-16У) |
Sheets:
4.0х1000-1250х2000-5000 3.0-3.9x1000x2000-3500 |
Hold-rolled |
TU U
14-4-435-98 |
10Х13Г18ДУ(ДИ-16У) |
Sheets:
15.0-2.0x1000-1250x2000-3000 0.8-2.0x1000-1100x2000-3000 |
Cold-rolled |
TU
14-15-315-93 |
10Х13Г18ДУ(ДИ-16У) |
Coils:
0.8-2.0x1000 |
Cold-rolled |
|
Mechanical properties of
hot-rolled stainless steel plate. GOST 7350-77
| ||||
steel
grade |
tensile
straength H/mm² (kgf/mm²) |
yield
point Н/mm² (kgf/mm²) |
elongation, %
|
other
requirements |
not less
than | ||||
08Х18Н10Т
|
510 (52)
|
205 (21)
|
43
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
08Х18Н10
|
510 (52)
|
205 (21)
|
43
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
12Х18Н10Т
|
530 (54)
|
235 (24)
|
38
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
12Х18Н9
|
530 (54)
|
215 (22)
|
38
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
17Х18Н9
|
600 (60)
|
265 (27)
|
35
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
20Х13
|
=<750
(76) |
-
|
-
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
10Х14АГ15
|
740 (75)
|
290 (30)
|
45
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
10Х13Г18ДУ |
640 (65)
|
315 (32)
|
47
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
08Х18Т1
|
490 (50)
|
-
|
25
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
08Х18Тч
|
470 (48)
|
-
|
35
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
08Х13
|
650 (66)
|
250 (25)
|
15
|
The
plates are supplied in heat-treated and pickled state, surface finish
group M3b - M5b |
|
|
Mechanical properties of
hot-rolled and cold-rolled stainless steel sheets. GOST 5582-75
| ||||
steel
grade |
tensile
straength H/mm² (kgf/mm²) |
yield
point Н/mm² (kgf/mm²) |
elongation, %
|
other
requirements |
not less
than | ||||
08Х18Н10Т
|
54
|
-
|
37
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
08Х18Н10
|
52
|
-
|
45
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
12Х18Н10Т
|
54
|
21
|
40
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
12Х18Н9
|
55
|
-
|
38
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
17Х18Н9
|
60
|
-
|
35
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
08Х13
|
42
|
-
|
21
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
20Х13
|
50
|
-
|
20
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
30Х13
|
50
|
-
|
15
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
10Х14АГ15
|
75-96
|
30
|
45
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
10Х13Г18ДУ |
68
|
35
|
48
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
04Х17Т-ГР
|
48
|
-
|
32
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
08Х18Т1
|
47
|
-
|
32
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
08Х18Тч
|
48
|
-
|
35
|
The
sheets are supplied in heat-treated and pickled state. Surface finish:
group M3b - M4b for hot-rolled sheets and group M2a - M4a for cold-rolled
sheets |
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
GOST
|
steel
grade |
dimenshions within the limits,
mm |
notes
|
Alloy
structural steel sheets | |||
GOST
11268-76 |
25ХГСА,
30ХГСА и and other alloy steel grades |
3.5-3.9х1000-1100х2000-5000,
3.0-3.9х1000х2000-5000 |
Hold-rolled, Hold-rolled
|
GOST
11268-76 |
25ХГСА,
30ХГСА и and other alloy steel grades |
2.103.9х1000-2000х2000-3000,
1.5-2.0х1000-1250х2000-3000 |
Cold-rolled, Cold-rolled
|
GOST
11269-76 |
25ХГСА,
30ХГСА и and other alloy steel grades |
4.0-6.0х1000-1250х2000-5000,
4.0-5.0х1500-2000х до 2750 |
Hold-rolled, Cold-rolled
|
Cold-rolled alloy structural steel
products of steel grade 65Г | |||
TU
14-15-330-94 |
65Г
|
0.8-2.0х1000-1250х2000-2500,
1.5-3.9х1000-1500х2000-3000 |
Cold-rolled, Cold-rolled
|
GOST
1577-81 |
65Г
|
3.0-3.9х1000-1250х2000-3500,
4.0-6.0х1...-1250х2000-3500 |
Hold-rolled, Hold-rolled
|
Alloy
tool steel sheets | |||
TU
14-19-145-94 |
7ХНМФБ,
5Н1А |
3.0-6.0х1000-1100х2000-3000,
2.5-3.9х1000-1100х2000-3000 |
Hold-rolled, Cold-rolled
|
Small-size rolled products
| |||
TU У
14-4-404-97 |
Alloy
stainless structural steel |
Sheet
size to conform to specifications |
|
|
Mechanical properties of
hot-rolled and cold-rolled alloy steel products GOST 7350-77
| ||||
steel
grade |
tensile
strength H/sq.mm (kgf/sq.mm) |
yield
point Н/sq.mm (kgf/sq.mm) |
elongation, %
|
othe
riquirements |
not less
than | ||||
25ХГСА
|
1080
(110) |
-
|
10
|
Mechanical properties of
heat-treated samples |
30ХГСА
|
1080
(110) |
-
|
10
|
Mechanical properties of
heat-treated samples |
65Г
|
590-880
(60-90) |
-
|
10
|
Mechanical properties of
heat-treated samples |
7ХНМФБ
|
745 (75)
|
470 (48)
|
20
|
Mechanical properties of
heat-treated samples |
5Н1А
|
745
(75) |
470
(48) |
20
|
Mechanical properties of
heat-treated samples |
steel
grade |
dimensions within the limits,
mm |
Ni
stainless steel sheets TU U 14-4-436-98
| |
12Х18Н10Т
|
3.003.9х1000 х2000-5000,
4.0-4.6х1000-1250х2000-5000, 5.0-6.0х1000-1310х2000-5690 |
Ni-free
stainless steel sheets TU U 14-4-436-98
| |
10Х14АГ15
(ДИ - 13) |
3.0-3.9х1000; 1100х2000-5000,
4.0-6.0х1000; 1100х2000-5000 |
The
sheets with special surface finish with respect to standardization of
roughness value are produced at the Works in compliance with requirements
of GOST 2789-73 to yield in of the following numbers: Quality of surface finish
and standardized value of roughness should be specified in the
order.
·
hard-worked and half hard-worked
steel sheets are used as liners in pressing the laminated plastic
materials and papers laminates;
·
as heat-treated for the
manufacture of industrial equipment, household appliances and other
applications. | |
|
|
|
| ||||||||||||||||
|
|||||||||||||||||
ARCELORMITTAL RZK ÇELİK SERVİS MERKEZİ SAN. VE TİC. A.Ş. |
İKİTELLİ
ORGANİZE SANAYİ BÖLGESİ DEPO VE ARDİYECİLER KOOPERATİFİ 102 ADA, 3 PARSEL İKİTELLİ / İSTANBUL |
Tel: 0212 675 10 00 (pbx) Fax : 0212 675 10 26 - 0212 675 10 27 |
e-mail : imalat@rzkcelik.com |